Inkedibles offers 3 flush systems:
- Item 515-015-01 (Inkedibles Printhead PowerCleaning Flush System (for removable Canon printheads)
- Item 515-016-01 (Inkedibles Printhead Flush System for all Canon Printheads)
- Item 515-017-01 (Inkedibles Printhead Flush System for all Epson Printheads)
--------------------------------------
Instructions for using the POWERCLEANING System (515-015-01):
This PowerCleaning Flush system is for use on any Canon printheads that are removable (such as for Canon ip3600 and Canon MG5320). Will not work on Canon ip7220 or other Canon printers in which the printheads are not removable (for these printers, use our manual printhead flush systems dedicated for all Canon, or for all Epson).
Included: power flush system, cleaning fluid, soaking jar, cleaning cloth, tweezers, gloves
What else is needed: Water faucet with standard threaded nozzle, cotton swab, paper towel.
Instructions:
Open your printer, remove the ink cartridges and seal them using the original orange clips; or if you don’t have the orange clips any more you can temporarily store the cartridges in a sealed plastic bag.
Remove the printhead (the box like portion) by first raising the bar which holds the printhead in place then gently lifting the printhead up and forward. To the right is what a typical printhead looks like (yours may be slightly different depending on printer model).
Place the printhead on a paper towel or soft cloth and gently remove the round black seals (indicated by the red arrows in the picture) at each cartridge nozzle contact spot with the tweezers.
Place the seals in the jar filled half way with cleaning solution to soak in order to remove any ink residue.
(illustrated instructions included with purchase)
???--------------------------------------
Instructions for using the Other Systems (515-016-01 and 515-017-01):
Those Flush systems are for use on any Epson or Canon printheads, removable or not.
Included: flush system, cleaning fluid, soaking jar, cleaning cloth, tweezers, gloves
What else is needed: cotton swab, paper towel.
Instructions:
Open your printer, remove the ink cartridges and seal them using the original orange clips; or if you don’t have the orange clips any more you can temporarily store the cartridges in a sealed plastic bag.
Signal to the printer that you want to change the ink cartridges, so the printhead carriage moves to an accessible position. Now insert a paper towel beneath the printhead (this will absorb the cleaning fluid that you will be flushing through the printheads).
On the printhead, you will notice 3 or 4 smaller nozzle contact spots. There is also a larger nozzle contact spot. Using a cotton swab or soft cloth, apply a small amount of cleaning solution to each contact spot and let soak for 3 minutes. This will help dissolve any superficial clogs.
Then, one at a time, attach the flush tool to the nozzle contact spots by gently twisting in place over the contact spot, and flush with the cleaning fluid through the nozzles. The paper towel below the printhead will absorb the cleaning liquid.
Now you can reinsert your cartridges and get back to printing.
(illustrated instructions are included with purchase)
???--------------------------------------
Please click here to download attachment link
Please click here to download attachment link
Please click here to download attachment link